2 Channel Unbalanced RCA Audio to Fiber Optic Extenders Optical SC Singlemode Fiber Cable Long Distance up 20Km A Pair

Attention: Please take note that this item is ordinary unbalanced audio fiber converter, Don’t suggest using for professional broadcast liveshow, Concert etc, it required higher quality Balanced XLR audio for better sound quality Specifiation: Audio interface: 1. Connector: RCA 2. Input Impedance: 600 ohm/47K (balance/unbalance) 3. Output Impedance: 600 ohm/10K (balance/unbalance) 4. Max input/output voltage: 2.0Vp-p 5. Frequency response: 20HZ-20KHZ 6. Audio sample rate: 48.6KHZ 7. SNR: ≥85dB Fiber interface: Optical connector: SC/UPC Wavelength: 1310nm/1550nm Support Fiber type: single fiber single-mode (SM) or multi-mode (MM) Transmission range: 0-20km by SM, 0-500m by MM. LED Indicators: 1.P:power light, constant on after power on. 2.F: fiber light, constant on if fiber link established. if fiber link not established, light off. General Spec: Working temperature: -20°C ~ +70°C. Storage temperature：-40 to 80°C Relative humidity:5 to 95% (non-condensing) Support wide range working Voltage: AC100-240V 50/60Hz, DC12V Working life: more than 1,0,000,000 hours Power plug：US standard Dimension: 167mm(L)×114mm(W)×45mm(H). Package include: 1x Audio Fiber Transmitter 1x Audio Fiber Receiver 2x US standard Power supply adapter 1x FREE 3M Fiber patch cord 1x Manual.

• 【Audio over Fiber】The audio over fiber converter can extend 2 channels of Unbalanced Audio over a fiber optic cable to far end. It allows 2 audio device with RCA interface synchronous transmission, the 2 Audio signal is transmitted from T (TX) in the direction of R (RX)
• 【Long Transmission range】It can work on both single-mode and multi-mode fiber cable. Long transmission distance: Single mode up to 12.4 miles (20Km), ,multi-mode single fiber up to 0.3mile (500meters)
• 【Wide Applications】Typically used in applications for Intercom System, remote multimedia teaching,Campus monitoring,TV and telephone conference, Theaters, Stadiums, Parks, studio audio etc. (Please take note that this item is ordinary unbalanced audio fiber converter, Don’t suggest using for professional broadcast liveshow, Concert etc, it required higher quality Balanced XLR audio for better sound quality )
• 【LED Monitor】LEDs for power supply and optical fiber link, data status indication can monitor the operating status of the system
• 【Plug and Play】No need to set up ,Plug and play. Simply plug in an power port and RCA audio connectors at TX and RX sides, it will have clear sound instantly